DRILLING
TYPE: PEDDINGHAUS MODELS BDL-1250/9 (CNC CONTROLLED) AND BDL-1250/D (CNC CONTROLLED) DRILL LINES
SPECIFICATIONS:
• 50″ MAX. BEAM DEPTH
• 24″ MAX. FLANGE WIDTH
• 2 ” MAX. HOLE DIAMETER
• 43,000 LB MAX. WORK PIECE WEIGHT
• VARIOUS FLANGE WIDTHS AND SHAPES
• SIGNOSCRIPT MARKING SYSTEM

CAMBERING
TYPE: HYDRAULIC CAMBER PRESS
SPECIFICATIONS:
MAX. SIZE WIDE FLANGE W30″ X 99″

SAWING
TYPE: GERNETTI MODEL VS 49/17 COLD SAWS (2) (CNC CONTROLLED)
SPECIFICATIONS:
• W14″ X 730″ MAX. COLUMN SIZE
• W36″ X 300″ MAX. BEAM SIZE
• UNLIMITED MEASURING ABILITY
• SIGNOSCRIPT MARKING SYSTEM

OVERHEAD CRANES (32)
SPECIFICATIONS:
• (18) 5 TON
• (9) 10 TON
• (4) 25 TON
• (1) 32 TON

SHEARING
TYPE: BERTSCH PLATE & SHEET SHEAR
SPECIFICATIONS:
• 10′ MAX. PLATE WIDTH
• 1/2″ MAX. PLATE THICKNESS

MATERIAL HANDLING
SPECIFICATIONS:
• (3) 10,000 LB SIDE LOADERS
• 8,000 LB FORKLIFT
• 13,000 LB FORKLIFT
• 20,000 LB FORKLIFT
• 15 TON HYDRAULIC CRANE
• 65,000 LB MI-JACK
• 2,000 FEET OF AUTOMATED CONVEYOR SYSTEM RATED AT 1,000 LB PER FOOT

PUNCHING
TYPE: PEDDINGHAUS MODEL F 1154-30 PLATE DUPLICATOR (CNC CONTROLLED)
SPECIFICATIONS:
• 175 TON SINGLE PUNCH
• 30″ X 60″ MAX. PLATE SIZE
• 1 5/8″ MAX. HOLE SIZE
• 1 1/4″ MAX. THICKNESS

COPING
TYPE: PEDDINGHAUS MODEL ABCM-1250/3 OXY/FUEL COPER (CNC CONTROLLED)
SPECIFICATIONS:
• COPER BURNING SYSTEM
• 52″ MAX. OPENING
• 50″ MAX. BEAM WIDTH

ROLLING
TYPE: PULLMAX MODEL Z-41 ANGLEROLL
SPECIFICATIONS:
• L5″ X 5″ X 1/2″ MAX. CAP. LEG OUTWITH 63″ MIN. DIAMETER

SAWING
TYPE: HE&M MODEL V125 SMART SAW VERTICAL BAND SAW (2) (CNC CONTROLLED)
SPECIFICATIONS:
• 21″ MAX. CUTTING HEIGHT
• 20″ MAX. CUTTING WIDTH
• AUTO INDEX CUTTING
• 45 DEGREES TILT ANGLE

SURFACE PREPARATION
TYPE: BLASTEC TWELVE WHEEL CENTRIFUGAL SHOT BLASTER
SPECIFICATIONS:
• 60′ ENTRANCE CONVEYOR
• 60′ EXIT CONVEYOR
• 6′ X 12′ BLASTER WORK OPENING
• SPLIT TOP
• 50 TON OVERHEAD CRANE CAPACITY

MATERIAL MARKING
TYPE: SIGNOSCRIPT MARKING SYSTEM (CNC CONTROLLED)

PLATE FORMING
TYPE: AMERICAN HERCULES MODEL 350-12 PRESS BRAKE
SPECIFICATIONS:
• 350 TON
• 1/2″ MAX. THICKNESS
• 12′ MAX. WIDTH

ROLL FORMING
TYPE: ROUNDO MODEL 255/10 PLATE ROLLER
SPECIFICATIONS:
• 1/2″ X 10′ RATED CAPACITY

SAWING
TYPE: PEDDINGHAUS MODEL BS 44/19 HORIZONTAL BAND SAW (CNC CONTROLLED)
SPECIFICATIONS:
• 44″ X 19″ CUTTING CAPACITY
• W44″X 335″ STRUCTURAL
• W14″X 730″ STRUCTURAL
• 6″ X 44″ PLATE
• 20″ TUBE
• 17″ SOLIDS
• SIGNOSCRIPT MARKING SYSTEM